Adlink ND-6024 Instrukcja Użytkownika Pobierz pdf (Strona 20)

•

Initialization & Installation

• Power supply (+10 to +30 V

) for NuDAM modules

• Administrating utility software

Initialization Procedure

1. Power off the host computer and the installed NuDAM-6520. Be sure of

the baud rate of the NuDAM-6520 is 9600 bps.

2. Connect a brand new NuDAM module with the RS-485. Set the module

in Default State by shorting the

DEFAULT*

pin. Refer to Figure 2.1 for

detailed wiring.

3. Power on the host computer.

4. Power on the power supply for NuDAM modules.

5. Use the NuDAM Administrating utility to configure the address ID, Baud

rate and check-sum status of the module.

Initialization Wiring

Figure 2-1 Layout for Initialization the NuDAM module

Host

Computer

DATA +

DATA -

+Vs GND

DATA+

DATA -

Default*

+Vs GND

Local Power Supply

+10 V to +30 V

+Vs GND

New

NuDAM

module

NuDAM-6520

RS-232/RS-485

Converter

RS-232

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 64 65

Brak uwag

Adlink ND-6024 Instrukcja Użytkownika Strona 20